Gunfighter Design

Hard use tools for serious people. Veteran designed and crafted.

The Tools Of The Trade

  • The HYDRA SERE knife
    Vendor
    Gunfighter Design
    Regular price
    $425.00
    Sale price
    $425.00
    Regular price
    Unit price
    per 
    Sold out
  • Gunfighter Design Makers Mark T-Shirt
    Vendor
    Gunfighter Design
    Regular price
    $30.00
    Sale price
    $30.00
    Regular price
    Unit price
    per 
    Sold out
  • The POPS MK1
    Vendor
    Gunfighter Design
    Regular price
    $375.00
    Sale price
    $375.00
    Regular price
    Unit price
    per 
    Sold out
  • High Vis Gunfighter Design Makers Mark Sticker
    Vendor
    Gunfighter Design
    Regular price
    $3.50
    Sale price
    $3.50
    Regular price
    Unit price
    per 
    Sold out
  • The Greenside
    Vendor
    Gunfighter Design
    Regular price
    $550.00
    Sale price
    $550.00
    Regular price
    Unit price
    per 
    Sold out
  • POPS MK2 Production
    Vendor
    Gunfighter Design
    Regular price
    $375.00
    Sale price
    $375.00
    Regular price
    Unit price
    per 
    Sold out
  • Custom leather sheath
    Vendor
    Gunfighter Design
    Regular price
    $150.00
    Sale price
    $150.00
    Regular price
    Unit price
    per 
    Sold out
  • Axe Wax
    Vendor
    Axe Wax
    Regular price
    $22.00
    Sale price
    $22.00
    Regular price
    Unit price
    per 
    Sold out
  • Dalibor Bergam Mars
    Vendor
    Gunfighter Design
    Regular price
    $2,250.00
    Sale price
    $2,250.00
    Regular price
    Unit price
    per 
    Sold out
  • Gunfighter Design Makers Mark Hat
    Vendor
    Gunfighter Design
    Regular price
    $30.00
    Sale price
    $30.00
    Regular price
    Unit price
    per 
    Sold out

Gunfighter Design

Handcrafted Beautiful Tools

SHOP NOW

GUNFIGHTER DESIGN CUSTOM

OUR PRODUCTS

GUNFIGHTER DESIGN

Lead Times

Books are open! Lead times for custom designed knives are 4-6 months at this time.

NEW PRODUCTION COMING SOON...STAY TUNED FOR DETAILS...FOR KNIVES READY TO SHIP!!

SEE WHAT IS INSTOCK

gunfighter design made to order

Custom made to order

Custom made for you. All my hand made tools are unique and specifically made just for you. You can choose your blade finish, handle material, serial number and sheath. I also offer custom cerakote and custom deep etching.

CUSTOM ORDER

Axe Wax

Protect your investment! Most knife steels will rust if uncared for. Axe Wax is an amazing all natural, food safe product that protects and seals your tools. Use it on your blades, handls and sheathes to repel water and help prevent rust.

ORDER TODAY

GUNFIGHTER DESIGN-About US

Gunfighters

Robert Ziarnick: Growing up in the remote mountains of North Idaho I spent a great deal of time hunting, fishing, hiking and camping. A knife was always in my pocket or on my belt. At 16 I started working with metal, welding and working on cars, this led me to my first knife build forged out of a rolled Chevy parts truck I had bought for the axles. I also joined the Navy while in high school with the hopes to join the SEAL teams after finding I was ineligible to even try out for BUD/S I dropped out of school to get out of the Navy. Two years went by and every day I regretted my decision. My grandfather, a retired LA county sheriff and Marine talked me into contacting a Marine recruiter. A month later I had my GED and was at the MEPS signing my life away to the USMC. I had a goal in mind to become a Scout Sniper and was quickly given that opportunity after being assigned to Lima Company to 3rd Battalion 1st Marines 1st MARDIV. My first school Urban Reconnaissance and Surveillance had me hooked and motivated. In March 2002 I graduated High Shooter from the legendary 1st MARDIV Sniper School at that point I had been a Marine for only a year and a month, 2 days later I was on the USS Belleau Wood LHA-3 with the11th MEU heading for the Middle East and Africa. During that deployment my good friend Buck and I came up with the idea to buy a used box truck to start a knife shop in the barracks parking lot. That idea never came to fruition because we were immediately redeployed on the USS Bonhomme Richard LHD-6 for OIF-1.  After returning CONUS I attended SERE School, DEST, PDHAS, CWSS, Mountain Scout Sniper, MCMAPS green belt instructor course, a few other schools and training evolutions.  A short time later I was back in Iraq for OIF-2. In 2005 I got out of the Marines with a TBI and PTSD my life was in a massive downward spiral and by august of 2006 I was on my 4th serious Suicide attempt that landed me in the hospital for 5 years of intensive inpatient treatment. Suicide saved my life. While in the hospital I attended college for machining and for automotive technician, which I turned into a career building high-end hotrods, retromods, off road vehicles and racecars. As a hobby I started forging straight razors and knives. My good friend (brother really) Buck was visiting and we drew up our dream knife it took a few years and a move for me to get around to actually make it and when I did get it done I knew I had something fresh that no one else was making. Gunfighter Design and Fabrication is born October 2018, which I started as a venture into my own fab shop, I quickly began making more and more knives and my hobby became a full time job and overtook my regular fab shop and car building. February 2021 I was hit head on by a drunk driver and have been in recovery and therapy every since. A growing business and diminished ability to keep up with production demands I made the decision to take on a business partner... Meet Eric a fellow Sniper legit badass and Distinguished Service Cross recipient.    

 

Eric Moser:  Grew up in Tomball, Tx involved in anything outdoors.  active in scouts earned Eagle Scout.  His high school didn't have auto shop or any real tech programs just prepping students for college.  Eric was able to find what he was looking for in AgMech class getting immersed in welding/fabrication, with skidsteer maintance and grain silo calculations mixed in a bit.  He started modifing his SUV with custom roof racks, headache racks for his trucks, and building just about anything he could dream up.  Which later lead to custom bumpers, sliders, and dune buggy's.  Eric aspired to join the service to mirror his grandfather who was a retired Green Beret.  His mom being an Army Brat wished for Eric to give college a try first.  So he attended Texas A&M for 1.5 years studying Mechanical Engineering then left to pursue his dream of being a Green Beret like his grandfather.  Serving in the 82nd Airborne, 10th Special Forces Group as a 18C Engineer, and 3.5 years as a Special Forces Sniper Course marksmanship instructor.  Eric began applying the 1.5 years of Mechanical Engineering degree from Texas A&M to making things for his co workers.  In off time during his instructor time.  Eric started making a product using a manual Milling machine to help the sniper community. realizing turning machine dials to make these one at a time wasn’t a business.  Eric set out and taught himself Solidworks, BOBCAD/CAM and Fusion 360 to gain access to 3D CAD(computer aided design) and CAM(Computer-Aided Manufacturing) to make parts more efficiently.  Converting his manual Mill to CNC himself.  To self fund his CNC machining endeavor Eric started taking on custom firearms projects.  ie. racing out pistols for 3 Gun competitors and building precision bolt guns and AR’s for competitors across the competitive shooting spectrum. Eric is proficient at forging and blacksmithing knives and is perfecting his knife making skills as a source of stress relief and enjoyment. When the opportunity arrived to partner with Gunfighter Design and Rob Ziarnick, their instant friendship and commonalities in knife making (and military brotherhood) really aligned for them to be able to collaborate to bring some great knives to the industry.